Reliable
quick-tensioning-frames
such as
QuattroFlex and VectorGuard

VectorGuard Standard or High Tension

VectorGuard
Standard oder High Tension

This four-sided spring-tensioning system accommodates the VectorGuard stencil surrounded by aluminium borders. Easy handling, as well as increased stability of the stencil thanks to an aluminium profile, characterise the system:

  • VG260 23" x 23"
    External dimensions: 584 mm x 584 mm
    Adaptable to: 736 mm x 736 mm
    Stencil size: 555 mm x 555 mm
  • VG265 29" x 23"
    External dimensions: 736 mm x 584 mm
    Adapable to: 736 mm x 736 mm
    Stencil size: 709 mm x 555 mm           

Inquire now

 

ALPHA tensoRED

New four-sided tensioning system, which tensions Tetrabond and VectorGuard stencils with up to 45 N/cm². The tensioning system works purely mechanically without compressed air. To tension the stencil, a charging station is needed.

  • 23" x 23" Master Frame
    External dimension: 584 mm x 584 mm
    Stencil size: 555 mm x 555 mm
     
  • 29" x 23" Master Frame
    External dimension: 736 mm x 584 mm
    Stencil size: 709 mm x 555 mm

    Master Frames are adaptable to 736 x 736 mm²

Inquire now

 
 
Quattro-Flex II

Quattro-Flex II

This four-sided quick-tensioning system holds the license-free stencil tensioned by means of compressed air. Pressure reducers allow for continuous and precise control of the stencil tensioning:

  • Square
    External dimension: 584 mm x 566 mm
    Adaptable to: 736 mm x 736 mm
    Stencil size: 555,5 mm x 555,5 mm
     
  • Rectangular
    External dimension: 720 mm x 584 mm
    Adaptable to: 736 mm x 736 mm
    Stencil size: 709,5 mm x 555,5 mm  

     

Inquire now

 
Quattro-Flex-3

Quattro-Flex-3

The new system is used with a loading station, without hold-down borders. The loading station can be dispensed with when using BECsnap stencils for QuattroFlex. The frame is slightly lighter than its predecessor and offers a 5-mm larger squeegee blade area circumferentially:

  • Square
    External dimensions: 584 mm x 566 mm
    Adapable to: 736 mm x 736 mm
    Stencil size 555,5 mm x 555,5 mm
     
  • Rectangular
    External dimensions: 720 mm x 584 mm
    Adapable to: 736 mm x 736 mm
    Stencil size: 709,5 mm x 555,5 mm

Inquire now

 
 
AlphaTetra

AlphaTetra

The four-sided spring tensioning system is suitable for stencils
with AlphaTetra, MicroMount or the patented BEC100 edge perforation:

  • 23" x 23"
    External dimensions: 584 mm x 584 mm
    Adaptable to: 736 mm x 736 mm
    Stencil size: 558 mm x 558 mm
     
  • 29" x 23"
    External dimensions: 736 mm x 584 mm
    Adaptable to: 736 mm x 736 mm
    Stencil size: 711 mm x 558 mm

 

Inquire now

 
ZelFlex Z4P

ZelFlex Z4P

This four-sided quick-tensioning system uses compressed air to tension the license-free stencil. A permanent supply of compressed air is not necessary for this; the compressed air supply can be removed immediately after tensioning the stencil:

  • Small
    External dimensions: 558 mm x 558 mm
    Stencil size: 520 mm x 520 mm
     
  • Standard
    External dimensions: 584 mm x 584 mm
    Stencil size: 546 mm x 546 mm
     
  • Large
    External dimensions: 736 mm x 736 mm
    Stencil size: 698 mm x 598 mm

Inquire now

 
 
 

Reliable quick-tensioning frames for SMT stencils

Achieve highly accurate results with quick-tensioning systems

Quick-tensioning frames ensure a good and evenly fixation of the SMD stencil.  Efficiency, precise printing results and comprehensive process reliability are particulary important. The stencil is ready for use quickly and can be archived space saving easily. We offer  quick-tesnioning frames of differtn types such as VectorGuard, Quattroflex, ZelFlex and AlphaTetra. You benefit from the latest technologies in tensioning frame technology, always up to date.

Of course, BECKTRONIC manufacture SMD stencils for all standard quick-tensioninge frames - whether Quattroflex or VectorGuard, ZelFlex, AlphaTetra, Heeb, Metz or Paggen. Our stencil type BECsnap is a good choice for use in QuattroFlex or VectorGuard frames.

We offer expert and independent advice. Together with you, we will find the optimal solution when choosing a quick-tensioning frame for your electronics production.

 

 
 

Still have questions?

Contact person

Contact BECKTRONIC Claudia Müller
phone handset

+49 2743 9204 - 11

Monday through Friday, 8 - 17 hrs

 

Contact form

Rückruf EN

Rückruf

I agree that details submitted in the contact form will be collected and processed to answer my request. Note: You can revoke your consent at any time by e-mail to info@becktronic.de. Detailed information on handling user data can be found in our privacy notice.

 
 

BECnews

Subscribe now to the Becktronic newsletter for the latest industry information, news from our company, and tips and trends concerning laser-cut SMD stencils and high-precision stencils for LTCC, wafer and special applications!